Sprinkler Head & Nozzle Repair in Tyler, TX

Wasting Water Wastes Your Money

When a sprinkler head breaks, clogs, or tilts out of position, you get dry brown patches next to soggy spots, water spraying the driveway, and a bill for water your lawn never gets.

All Time Sprinkler & Drainage provides sprinkler head and nozzle repair in Tyler, TX. From a pop-up head that won't rise to a nozzle spraying the driveway, we find the problem and get your coverage back where it belongs.

Schedule Controller Repair

Signs Your Sprinkler Heads Need Repair

You don't have to wait for a geyser to know something's wrong. Run each zone for a few minutes and watch for:

Heads that don’t pop up, or pop up only partway
Water gushing or bubbling from the base of a head instead of spraying
Heads that stay up after the zone shuts off
Weak, misty, or uneven spray patterns
Rotors that are stuck in one spot or not turning through their full arc
Water hitting the house, fence, sidewalk, or street instead of the lawn
Dry or brown patches between heads, even with the system running on schedule
Heads that are cracked, tilted, sunken below the grass line, or missing entirely

Schedule Sprinkler Repair

What Causes Sprinkler Head & Nozzle Problems?

Mower & Edger Damage

A head sitting too high can become a target for lawn equipment. A cracked cap, broken nozzle, or damaged riser may leave water spraying in every direction.

Dirt & Debris

Soil and debris can clog a nozzle or its filter, interrupting the spray pattern. Replacing the entire head isn't always necessary; sometimes cleaning the blockage is enough.

Buried or Tilted Heads

As grass thickens and landscaping changes, a head may sit too low to clear the surrounding growth. A tilted head can also send water into the ground before it reaches the area it should cover.

Worn Seals & Moving Parts

Sprinklers have to rise, spray, and retract over and over. Worn seals or damaged internal parts can lead to leaks, sticking stems, or a rotor that no longer turns.

Incorrect Nozzles & Pressure Problems

A nozzle needs to suit the space and the system. Too much pressure can create fine mist, while insufficient pressure can shorten the spray distance. We check the cause before treating every coverage problem as a broken head. rainbird.com

Sprinkler Head & Nozzle Repair Services for Tyler, TX

Head Replacement

Swapping out cracked, broken, or leaking spray heads and rotors with quality, correctly matched replacements.

Nozzle Cleaning & Replacement

Clearing clogged nozzles and filter screens, or replacing worn nozzles to restore a full, even spray.

Raising & Leveling Heads

Resetting sunken or tilted heads to the right height and angle so they clear the turf and spray straight.

Arc & Radius Adjustment

Re-aiming heads so water lands on your lawn and beds, not your driveway or siding.

Riser & Swing Joint Repair

Repairing the connection between the head and the lateral line, where many leaks at the base of a head actually start.

Nozzle Matching & Upgrades

Matching nozzles on each zone for even coverage. Where it makes sense, we can also upgrade to high-efficiency rotary nozzles that use less water.

Do You Need a New Head or Just a New Nozzle?

The head is the sprinkler assembly installed in the ground. The nozzle is the outlet that shapes and directs the water.

A clogged or damaged nozzle may be repairable without replacing the whole assembly. A cracked body or failed internal mechanism may call for a new head.

We explain what needs attention before recommending a replacement.

Schedule Head & Nozzle Repair

More Watering Time Won't Fix Poor Coverage

If one corner of the yard stays dry, adding minutes to the schedule can overwater everything else.

A seasonal sprinkler check helps identify damaged heads, blocked spray patterns, and coverage gaps before you keep adjusting the timer around them.

What Our Customers Say

"Daniel knows what can and cannot work in any particular area and offered many great ideas. He was also very agreeable to the few changes we recommended. Without a doubt, we received outstanding value for the cost of the project.”

Brian D.
“Daniel and his crew were punctual, professional and reliable. They first cleaned out a large flower bed, including the removal of a number of overgrown shrubs. They also installed a drip irrigation system in the flowerbed, and then built a beautiful garden path of stone and crushed granite.”

Jane F.
“Arrived when they said they would. Performed the work professionally. Quotes were fair and honest. Would use again and fully recommend.”

Bruce P.
“Daniel promptly identified and repaired some recent irrigation issues we were having. Very professional and courteous. We will definitely call again for future work, highly recommended!”

George M.
“I had them install a drainage system to get water to flow out of part of my yard. They were courteous, punctual and got the job done as quickly as I would have figured was possible.”

Clem. P.
“I would highly recommend this company. They had reasonable prices, did outstanding work, were very knowledgeable and were polite and professional.”

Rick P.

Frequently Asked Questions

Have questions about our services? We’ve got answers.

Ask Us A Question

How much does sprinkler head repair cost in Tyler, TX?

Cost depends on the type of head, how many sprinklers need attention, and whether a riser or underground fitting is also damaged. We inspect the issue and explain the recommended work before making repairs.

Can you replace one sprinkler head without replacing the whole system?

Yes. An isolated problem can often be handled by repairing or replacing the affected head. The replacement should be compatible with the zone and its watering requirements.

Why is my sprinkler head not popping up?

Debris around the stem, a damaged head, or inadequate water pressure can keep it from rising fully. If several heads struggle at once, we check for a broader flow or pressure problem.

Why is my sprinkler spraying mist instead of watering the grass?

Excessive pressure can turn the spray into fine mist. Nozzle or filter problems can also affect the pattern. We check those conditions before recommending a nozzle change or pressure-related repair.

Can you adjust sprinklers that water my driveway?

Yes. Direction, spray distance, and nozzle selection can all affect overspray. We check whether an adjustment will solve it or whether the sprinkler's position needs attention.

Why does water keep leaking from a head after the system shuts off?

Brief drainage from a low sprinkler can occur after a cycle. Water that continues flowing may indicate a valve that isn't closing properly. We check the source before assuming the head itself is defective.

Why is water bubbling out of the base of my sprinkler head?

Usually it’s a worn internal seal, a cracked head body, or a broken riser or fitting below the head. We dig around the head to find the source and replace the failed part.

Can I mix different types of sprinkler heads on the same zone?

It’s best not to. Spray heads and rotors put down water at very different rates, so mixing them on one zone usually leaves some areas soggy and others dry. We match heads and nozzles by zone for even coverage.