Sprinkler Wiring & Electrical Repair in Tyler, TX

The Timer Says It's Watering. The Yard Says Otherwise.

Your controller can show a zone running while the sprinklers never turn on. Somewhere between the timer and the valve, the signal may not be getting through.

All Time Sprinkler & Drainage tracks down and repairs irrigation wiring faults throughout Tyler, TX. We find the exact break, short, or failed connection, so you can enjoy a lush lawn again.

Schedule Sprinkler Repair


Signs Your Sprinkler System Has an Electrical Problem

  • Electrical faults aren't always visible. You may notice:
  • A zone that won't start from the controller
  • Several zones that stop working at the same time
  • A controller displaying a station error or short-circuit warning
  • Watering that works on some days and fails on others
  • Loose, exposed, or visibly damaged irrigation wires
  • Corroded connections inside a valve box
  • Zones that stopped working after digging or landscaping work

Schedule Sprinkler Repair

What Causes Sprinkler Wiring Problems?

Cut or Damaged Underground Wire

Fence installation, bed edging, and other digging can damage buried irrigation cable. A damaged conductor may interrupt the connection to one valve or several.

Loose or Corroded Connections

A connection can look intact and still fail to carry a reliable signal. We inspect connections at the controller and valve boxes for looseness, corrosion, and damage.

Common-Wire Problems

Many conventional sprinkler systems share a common wire between multiple valves. A problem along that shared connection can affect more than one zone. Hunter Industries

Failed Valve Solenoids

The solenoid is the electrical component that helps operate a sprinkler valve. A failed solenoid can keep a zone from opening or cause the controller to report a fault.

Controller Output Problems

Sometimes the wiring is intact, but the controller isn't sending the correct signal. We check the output before recommending underground wire repair.


How We Troubleshoot Sprinkler Electrical Problems

Replacing the timer won't fix a damaged wire. Replacing a valve won't correct a failed controller output. We test the system to find where the problem starts.

Test the Affected Circuit

Voltage and resistance checks help narrow down whether the fault involves the wire, a connection, or the solenoid.

Explain the Repair

Once we've identified the problem, we walk you through the recommended work and whether any buried wiring needs to be accessed.

Run the Zone Again

After repairs, we operate the affected zones from the controller to confirm they respond.

Check the Controller & Settings

We review the affected zones, programming, and any displayed errors, then check the controller's low-voltage output.

Inspect Valve-Box Connections

We examine accessible wiring and connections at the valves, looking for damage or poor contact.

Irrigation Wire & Solenoid Repair in Tyler, TX

A wiring problem doesn't automatically mean your system needs to be rewired.

Depending on what testing shows, repairs may include:

  • Reconnecting loose wires at controller terminals
  • Replacing failed valve-box connections with connectors suited for underground irrigation use
  • Repairing or replacing a damaged section of sprinkler wire
  • Correcting crossed or incorrectly connected zone wires
  • Repairing a faulty shared common-wire connection
  • Replacing a defective valve solenoid

If the controller is the source, we'll explain the next steps for controller repair or replacement.

Schedule Sprinkler Repair

Catch Sprinkler Electrical Problems Before Zones Go Dark

Wiring problems usually start small: a zone that skips a cycle, or a connection that works one day and not the next.

Our $99 seasonal maintenance visits include running every zone from the controller and checking for signs of electrical trouble, so problems get fixed while they’re still quick.

What Our Customers Say

  • "Daniel knows what can and cannot work in any particular area and offered many great ideas. He was also very agreeable to the few changes we recommended. Without a doubt, we received outstanding value for the cost of the project.”

    Brian D.

  • “Daniel and his crew were punctual, professional and reliable. They first cleaned out a large flower bed, including the removal of a number of overgrown shrubs. They also installed a drip irrigation system in the flowerbed, and then built a beautiful garden path of stone and crushed granite.”

    Jane F.

  • “Arrived when they said they would. Performed the work professionally. Quotes were fair and honest. Would use again and fully recommend.”

    Bruce P.

  • “Daniel promptly identified and repaired some recent irrigation issues we were having. Very professional and courteous. We will definitely call again for future work, highly recommended!”

    George M.

  • “I had them install a drainage system to get water to flow out of part of my yard. They were courteous, punctual and got the job done as quickly as I would have figured was possible.”

    Clem. P.

  • “I would highly recommend this company. They had reasonable prices, did outstanding work, were very knowledgeable and were polite and professional.”

    Rick P.

Frequently Asked Questions

Have questions about our services? We’ve got answers.

Ask Us A Question
Why does my sprinkler controller say it's running when no water comes out?

The display shows that the controller has started a watering cycle; it doesn't confirm that water is reaching the sprinklers. Possible causes include wiring faults, valve problems, a closed water supply, or a master valve that isn't opening.

Why did several sprinkler zones stop working at once?

On a conventional wired system, multiple zones may share a common-wire connection. A fault there can affect several valves. Shared water-supply, master-valve, or controller problems can also cause similar symptoms.

What does a sprinkler controller error message mean?

The meaning depends on the model and the exact message. Some station errors indicate a short circuit or defective solenoid. Record the message and affected zone number so we can use that information during diagnosis.

Do you have to dig up my yard to repair sprinkler wiring?

Not always. Some faults are at accessible controller terminals or valve-box connections. Buried wire damage may require excavation. We narrow down the fault first and explain what access the repair will require.

Can I fix sprinkler wiring myself?

Finding a buried break or short is hard without testing and tracing equipment. Splices also need to be properly waterproofed, or they’ll corrode and fail again.

How much does sprinkler wiring repair cost in Tyler, TX?

Cost depends on the location of the fault, access to the wiring, and whether the repair involves a connection, solenoid, or length of buried cable. Diagnosis helps establish the work needed for an accurate quote.

Can a lightning strike damage my sprinkler wiring?

Yes. A nearby strike or power surge can travel through buried wire and damage the wire, the valve solenoids, and the controller.

©2026 All Time Sprinkler & Drainage  |   Website by GroupM7 Design™

Privacy Policy  |  Cookie Settings